Robot system
Introduction of the robot system
Conventionally, because a robot arm performs work such as the installation of the work that a person performed, I can expect the reduction of the mistake and high efficiency.
Example 1. Work Transportation by Robots
Robots work with 3 sizes / 6 types of products.
Step.1
Operator loads a work on AGV from previous process.
Step.2
Robots transfer the work to each process in machining line.
Step.3
AGV unloads the work almost finished outside of the machining line.
Step.1
Operator loads a work on AGV from previous process.
Step.2
Robots transfer the work to each process in machining line.
Step.3
AGV unloads the work almost finished outside of the machining line.
| <System Component> |
| No. of Machine Tools | HMC SPN501 x 3 |
| No. of Work Transfer Robot | 2 |
| No. of Assembly machine | 1 |
| No. of AGV | 2 |
| No. of Measuring equipment | 1 |
①Of -⑥ → This is a conveyance root of # 1Robot
⑦Of -⑮ → This is a conveyance root of # 1Robot
Example 2. Heavy Tool Change by Robot Arm
Robot System achieves excess moment / heavy tool exchange.
| <System Component> |
| No. of Machine Tools | HMC HN63E x 1 |
| No. of Tool Change Robot | 1 |
| No. of Tool Table | 1 |
HN63E Maximum Tool Mass (Standard): 30kg
↓
Robot System Maximum Tool Mass: 35kg
↓
Robot System Maximum Tool Mass: 35kg
Example 3. Work air blow robot system
◆Work with the robot, air blow washing of the jig
It is an attempt to robotization and automation of the work that a person performs.
I realize reduction of the troublesome work by danger.
It is an attempt to robotization and automation of the work that a person performs.
I realize reduction of the troublesome work by danger.
| <System Component> |
| No. of Machine Tools | HMC ULTY701 x 1 |
| Robot | 1 |
| The appearance | System with a sense of unity with MC |
Example 4: Automation system with the collaboration robot
●Work management system with the QR cord
I link QR cord with work information, processing information and do it and enroll in a database automatically.
I contribute to management of the product traceability.
I link QR cord with work information, processing information and do it and enroll in a database automatically.
I contribute to management of the product traceability.
●External possible jig clamp ankh lamp system
An automatic jig realizes becoming it without remodeling on the machine side.
Air pressurization processing by OSK lock is unnecessary.
Air pressurization processing by OSK lock is unnecessary.
※The QR cord is a registered trademark of DENSO WAVE.
※The OSK rock is a product of the Oaku delicate work.
