HPN800
Hybrid guide system machine
Features
Point 1 hybrid construction
●Combines sliding guide + rolling guide to achieve both heavy cutting and high-speed feed.
●Y axis: corner slide
・Square slide structure with excellent vibration absorption (induction hardening)
●X, Z axis: Roller guide
・Equipped with a high-rigidity roller guide to achieve class-leading rapid traverse speed
Point 2 high productivity
●Rapid traverse speed: X, Y, Z axis 60m/min
・46% UP compared to conventional model
●Cycle time reduction
・Pallet exchange time: 38% reduction compared to conventional machine
・Tool change time: 64% reduction compared to conventional machine
Point three folds cutting
●Integrated high-rigidity base with 3-point support
・The internal structure uses a honeycomb rib structure.
●High rigidity spindle
・88000min-1 spindle (standard)
Maximum torque: 1202Nm
Main shaft motor: 55/37kW
●Can be equipped with the same bar center spindle as the HN series
Specifications
Item |
HPN800 | |
| TRAVEL | X axis travel (saddle side to side) | 1,530mm |
| Y axis travel (spindle head up and down) | 1,230mm | |
| Z axis travel (table front and rear) | 1,220mm | |
| TABLE | Table working surface | 800mm *800mm |
| Table increments | 1 degree (0.001 degrees) | |
| Maximum mass on pallet | 2,500 kg | |
| SPINDLE | Spindle speeds | 8000min⁻¹ |
| Spindle Max. torque | 1,202N, m | |
| Spindle taper | No. 50 | |
| FEEDRATE | Rapid traverse X,Y,Z axis | 60m/min |
| ATC | Tool magazine capacity |
90 (128) |
| MAXIMUM WORKPIECE ENVELOPE | Swing Diameter x Height | φ 1,750mm *1,400mm |
▼Contact
Inquiry Form
TEL.
+81-25-270-9011
