HN80E
Heavy Duty Cutting,
High Rigid Horizontal Machining Center
Features
Point 1 Heavy cutting ability
●High-stiffness base and induction hardening with the thickness are corner slide slideways with the handled width and improve ability for cutting
●Firm TABLE design by the large diameter sliding slideway
・TABLE maximum loading 2,500 kg in weight (as standard equipment)/3,000 kg (OP)
●The SPINDLE which is the high power that balanced high efficiency, high stiffness
・Spindle speeds: 6000min-1 (as standard equipment) /15000min-1(OP)
・Spindle Max. torque: 1,948N, m
Point 2 high productivity
●Achieve a superior machining area
・Maximum workpiece swing: φ1750mm
・Maximum workpiece height: 1400mm
●Combines speed and power
・Rapid traverse speed: 40m/min (25% increase compared to previous model)
・APC and ATC times reduced by approximately 30% compared to previous model
●Excellent chip disposal capabilities
・Large-diameter coil conveyors are standard equipment in front of and behind the table and on both sides of the column
・Maximum workpiece swing: φ1750mm
・Maximum workpiece height: 1400mm
●Combines speed and power
・Rapid traverse speed: 40m/min (25% increase compared to previous model)
・APC and ATC times reduced by approximately 30% compared to previous model
●Excellent chip disposal capabilities
・Large-diameter coil conveyors are standard equipment in front of and behind the table and on both sides of the column
Point 3 operability
●Superior operability, visibility
・The control panel placement that an operator can operate in a direction same as SPINDLE
・The stairs where it is easy to go up and down it, and the work space is large
●The APC design that plans it, and is most suitable for work of the big game work
・Rotary shuttle type palette switching equipment
・Large work space suitable for putting on and taking off of the big game work
Specifications
| Item | HN80E | |
| TRAVEL | X axis travel (saddle side to side) |
1,530mm |
Y axis travel (spindle head up and down) |
1,230mm | |
Z axis travel (table front and rear) |
1,020mm | |
| TABLE | Table working surface | 800mm *800mm |
| Table increments | 1 degree (0.001 degrees) | |
| Maximum mass on pallet | 2,500 kg (3,000 kg) | |
| SPINDLE | Spindle speeds | 6000min⁻¹(15000min⁻¹) |
| Spindle Max. torque | 1,948N・m | |
| Spindle taper | No. 50 | |
| FEEDRATE | Rapid traverse X,Y,Z axis | 40m/min |
| ATC | Tool magazine capacity | 62 (88, 128) |
| MAXIMUM WORKPIECE ENVELOPE | Swing Diameter x Height | φ 1,750mm *1,400mm |
NIIGATA Green Package (Energy Saving)
▼Contact
Inquiry Form
TEL.
+81-25-270-9011
