SPN701 / N7
High Precision & Productive Horizontal Machining Center
Features
Point 1 permanent space precision
●Box in Box® design ensures Long-term stability of machine accuracy.
●High rigid base structure allows 3-point leveling
Point 2 High precision
●High rigid machine base realizes high precision machining.
●No change of the machine accuracy after 3 years of the machine installation.
Point 3 High productivity
●High rigid & damping roller guide way system realizes high acceleration & deceleration.
●NIIGTA original Synchronous Swing Motion (SSM) ATC cuts tool exchange time.
Specifications
item |
SPN701 | |
TRAVEL | X axis travel (saddle side to side) |
1000mm (39.4") |
Y axis travel (spindle head up and down) |
950mm (37.4") | |
Z axis travel (table front and rear) |
850mm (33.5") | |
TABLE | Table size |
630mm x 630mm (24.8" x 24.8") |
Table increments | 1°[OP:0.001°] | |
Maximum mass on pallet |
1200kg (2640lbs) | |
SPINDLE | Spindle speeds | 12000min⁻¹ |
Spindle Max. torque | 420(N・m) | |
Spindle taper | No. 50 | |
FEEDRATE | Rapid traverse X,Y,Z axis |
60m/min (2362 ipm) |
ATC | Tool magazine capacity | 60 (126, 178) |
MAXIMUM WORK PIECE ENVELOPE |
Swing Diameter x Height |
φ 1100mm x 1200mm (43.3" x 47.2") |
High Precision & Productive Horizontal Machining Center
Features
Point 1 Long-term stability of machine accuracy
●Box in Box® design ensures Long-term stability of machine accuracy.
●High rigid base structure allows 3-point leveling
Point 2 Excellent spindle accessibility
●New design "slant nose spindle" achieves excellent accessibility.
●Cutting by short tool enables powerfull cutting.
Point 3 Long Z-axis stroke
●Z-axis stroke is 1050mm(41.3")
●Combination of Long Z-axis stroke & Max. tool length 630mm(24.8") enables
uni-direction boring to deep holes.
Specifications
item |
N7 | |
TRAVEL | X axis travel (saddle side to side) |
1000mm (39.4") |
Y axis travel (spindle head up and down) |
950mm (37.4") | |
Z axis travel (table front and rear) |
1050mm (41.3") | |
TABLE | Table size |
630mm x 630mm (24.8" x 24.8") |
Table increments | 1°[OP:0.001°] | |
Maximum mass on pallet |
1200kg (2640lbs) | |
SPINDLE | Spindle speeds | 12000min⁻¹ |
Spindle Max. torque | 420(N・m) | |
Spindle taper | No. 50 | |
FEEDRATE | Rapid traverse X,Y,Z axis |
60m/min (2362 ipm) |
ATC | Tool magazine capacity | 60 (88, 128) |
MAXIMUM WORK PIECE ENVELOPE |
Swing Diameter x Height |
φ 1100mm x 1200mm (43.3" x 47.2") |
NIIGATA Green Package (Energy Saving)
▼Contact
Inquiry Form
TEL.
+81-25-270-9011